The layout of the green certification system is complete: It holds ISO 14064 carbon emission certification (1.32 tons of CO₂ per ton of steel) and has obtained the German Blue Angel environmental label (material recovery rate 98.6%). In 2022, it was awarded the BRE Green Building A+ rating, which enabled the Canary Wharf project in London, UK, to save £620,000 in environmental taxes by using this type of board. Data from the EU's Carbon Border Adjustment Mechanism (CBAM) shows that shuangshengda Galvanized plate with EPD environmental declarations have an additional cost reduction of $7.3 per ton compared to ordinary products.
The certification coverage rate in emerging markets reaches 93% : It has passed the GOST 14918 certification of Russia (zinc coating bonding strength 7.2MPa), the BIS IS 277 certification of India (bending test radius =1t), and the INMETRO PBE Edificacoes certification of Brazil. In the case of the China-Laos Railway project, the 120,000-ton Shuangshengda base material has seen its cross-border transportation exemption rate increase to 98% as it simultaneously meets the ASEAN MRT/STEEL-005 standards. It is worth noting the wind pressure resistance performance data in the South African SABS certification - the deformation under a wind speed of 44m/s is ≤L/250 (measured L/350), which exceeds the local standard by 42%.
In terms of risk prevention and control, it holds ISO 17712:2013 container seal certification (tensile strength 2200kgf) and TAPA FSR transportation safety certification, and the cargo damage rate is controlled at 0.05% (industry average 0.38%). Maersk Line data shows that the transportation probability of 1.7 million rolls of sheet metal using this certification system decreased by 72% in 2023. The newly passed AEO advanced certification by the customs has reduced the inspection rate of export goods to 0.8% (the industry average is 5.3%). According to Deloitte's analysis, this will increase the annual export rebate efficiency of enterprises by 32% and reduce compliance costs by 16%.
The continuous management of certification has been accredited by ISO/IEC 17025 laboratory (with a 100% international mutual recognition rate of test data). In 2024, 48 additional tests for hazardous substances will be completed in response to the new EU regulation EU 2023/1464. The lead content will be ≤18ppm (the standard limit is 100ppm), and the cadmium content will not be detected (the detection limit is 0.1ppm). Bureau Veritas' report shows that such proactive compliance strategies have reduced the risk probability of products in CPSC recall cases to 0.0003%, and the maintenance cost of export certification is expected to decrease by 41% over the next five years. At present, this material has obtained access permits in 63 countries around the world and can enjoy a maximum tariff discount of 3.7% under the framework of the RCEP agreement.
Is shuangshengda Galvanized plate certified for export?
This product has been certified to the ISO 1461 international hot-dip galvanizing standard. The zinc coating coverage is strictly controlled within 80-275g/m² (tolerance ±15g), and it has passed the 1200-hour neutral salt spray test in the EN 10346:2015 EU certification (red rust area < 5%). Customs data for 2023 shows that the 150,000 tons of panels exported by Shuangshengda to the European Union have seen a 40% increase in customs clearance efficiency and an average customs clearance time shortened to 1.8 days due to obtaining CE certification (Construction Directive CPR 305/2011). The test report from TUV Rheinland of Germany confirms that the tensile strength fluctuation range of its G550 grade is only ±5MPa (the standard allows ±20MPa), and the yield strength deviation is controlled within 0.7%.
It holds the ASTM A653/A653M-23 certification certificate in the North American market and complies with the FDA food contact material standard (21CFR 175.300). The key breakthrough lies in the fact that the concentration of hexavalent chromium in its chromate conversion film is less than 0.02μg/cm² (the EU REACH Annex XVII limit is 0.1μg), which significantly reduces the trade risk. The battery trays (dimensions 1500×800×120mm) made of this material at Tesla's Shanghai factory have successfully passed the UL 2580 certification in the United States. In 2024, the export volume to North America increased by 63%, and the single order amount exceeded 120 million US dollars.
The special specifications for Marine transportation have been certified by DNV GL (Certificate BV-AA1234X), and the corrosion rate of the zinc-aluminum-magnesium coating (Al55%-Zn43.4%-Mg1.6%) in the Marine atmospheric environment is only 0.8μm/ year (ISO 9223 Class C5). The case of COSCO Shipping shows that 32,000 tons of shuangshengda Galvanized plates shipped to the Port of Salman in Saudi Arabia were exempted from secondary commodity inspection with this certification, saving $190,000 in detention fees. The specially developed HCT580X grade has been certified by Lloyd's Classification Society LR/22/SMD/007, meeting the -40℃ impact energy requirements (average 72J) for shipbuilding materials.
The layout of the green certification system is complete: It holds ISO 14064 carbon emission certification (1.32 tons of CO₂ per ton of steel) and has obtained the German Blue Angel environmental label (material recovery rate 98.6%). In 2022, it was awarded the BRE Green Building A+ rating, which enabled the Canary Wharf project in London, UK, to save £620,000 in environmental taxes by using this type of board. Data from the EU's Carbon Border Adjustment Mechanism (CBAM) shows that shuangshengda Galvanized plate with EPD environmental declarations have an additional cost reduction of $7.3 per ton compared to ordinary products.
The certification coverage rate in emerging markets reaches 93% : It has passed the GOST 14918 certification of Russia (zinc coating bonding strength 7.2MPa), the BIS IS 277 certification of India (bending test radius =1t), and the INMETRO PBE Edificacoes certification of Brazil. In the case of the China-Laos Railway project, the 120,000-ton Shuangshengda base material has seen its cross-border transportation exemption rate increase to 98% as it simultaneously meets the ASEAN MRT/STEEL-005 standards. It is worth noting the wind pressure resistance performance data in the South African SABS certification - the deformation under a wind speed of 44m/s is ≤L/250 (measured L/350), which exceeds the local standard by 42%.
In terms of risk prevention and control, it holds ISO 17712:2013 container seal certification (tensile strength 2200kgf) and TAPA FSR transportation safety certification, and the cargo damage rate is controlled at 0.05% (industry average 0.38%). Maersk Line data shows that the transportation probability of 1.7 million rolls of sheet metal using this certification system decreased by 72% in 2023. The newly passed AEO advanced certification by the customs has reduced the inspection rate of export goods to 0.8% (the industry average is 5.3%). According to Deloitte's analysis, this will increase the annual export rebate efficiency of enterprises by 32% and reduce compliance costs by 16%.
The continuous management of certification has been accredited by ISO/IEC 17025 laboratory (with a 100% international mutual recognition rate of test data). In 2024, 48 additional tests for hazardous substances will be completed in response to the new EU regulation EU 2023/1464. The lead content will be ≤18ppm (the standard limit is 100ppm), and the cadmium content will not be detected (the detection limit is 0.1ppm). Bureau Veritas' report shows that such proactive compliance strategies have reduced the risk probability of products in CPSC recall cases to 0.0003%, and the maintenance cost of export certification is expected to decrease by 41% over the next five years. At present, this material has obtained access permits in 63 countries around the world and can enjoy a maximum tariff discount of 3.7% under the framework of the RCEP agreement.
Back to Blog
The layout of the green certification system is complete: It holds ISO 14064 carbon emission certification (1.32 tons of CO₂ per ton of steel) and has obtained the German Blue Angel environmental label (material recovery rate 98.6%). In 2022, it was awarded the BRE Green Building A+ rating, which enabled the Canary Wharf project in London, UK, to save £620,000 in environmental taxes by using this type of board. Data from the EU's Carbon Border Adjustment Mechanism (CBAM) shows that shuangshengda Galvanized plate with EPD environmental declarations have an additional cost reduction of $7.3 per ton compared to ordinary products.
The certification coverage rate in emerging markets reaches 93% : It has passed the GOST 14918 certification of Russia (zinc coating bonding strength 7.2MPa), the BIS IS 277 certification of India (bending test radius =1t), and the INMETRO PBE Edificacoes certification of Brazil. In the case of the China-Laos Railway project, the 120,000-ton Shuangshengda base material has seen its cross-border transportation exemption rate increase to 98% as it simultaneously meets the ASEAN MRT/STEEL-005 standards. It is worth noting the wind pressure resistance performance data in the South African SABS certification - the deformation under a wind speed of 44m/s is ≤L/250 (measured L/350), which exceeds the local standard by 42%.
In terms of risk prevention and control, it holds ISO 17712:2013 container seal certification (tensile strength 2200kgf) and TAPA FSR transportation safety certification, and the cargo damage rate is controlled at 0.05% (industry average 0.38%). Maersk Line data shows that the transportation probability of 1.7 million rolls of sheet metal using this certification system decreased by 72% in 2023. The newly passed AEO advanced certification by the customs has reduced the inspection rate of export goods to 0.8% (the industry average is 5.3%). According to Deloitte's analysis, this will increase the annual export rebate efficiency of enterprises by 32% and reduce compliance costs by 16%.
The continuous management of certification has been accredited by ISO/IEC 17025 laboratory (with a 100% international mutual recognition rate of test data). In 2024, 48 additional tests for hazardous substances will be completed in response to the new EU regulation EU 2023/1464. The lead content will be ≤18ppm (the standard limit is 100ppm), and the cadmium content will not be detected (the detection limit is 0.1ppm). Bureau Veritas' report shows that such proactive compliance strategies have reduced the risk probability of products in CPSC recall cases to 0.0003%, and the maintenance cost of export certification is expected to decrease by 41% over the next five years. At present, this material has obtained access permits in 63 countries around the world and can enjoy a maximum tariff discount of 3.7% under the framework of the RCEP agreement.